Stahl Reihe 8146/5-V11, Руководство пользователя

Страница: 78 / 93

Mounting and Installation
32
147924 / 8146647300
2018-12-06·BA00·III·en·12
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Safety switch / load disconnect switch
Series 8146/5-V37, Series 8150/5-V37,
Series 8146/5-V11
7.2.1 Mounting Auxiliary Contacts
(possible for switches 40 A and higher)
Mounting
Dismounting
Before mounting an auxiliary contact, the cover must be removed.
The IP protection of the switch, IP 20 (finger safe), remains active even if the
cover is removed.
The switching function of the auxiliary contact depends on the installation slot
used (left: delayed (ON), leading (OFF); right: synchronising).
12435E00
• Carefully remove the cover (1)
of the installation slot (3) using a
screwdriver or a knife.
• Carefully insert the auxiliary
contact (2) into the installation
slot until it engages.
• Affix the enclosed circuit
diagram indicating the
respective switching function to
the rating plate of the switch.
15021E00
• Insert the auxiliary contact key
between the auxiliary contact
and the switch cover with the
Stahl logo
pointing upwards (!).
• Pull out the auxiliary contact
along with the auxiliary contact
key.
1
3
2
CLICK