Operating Instructions OS-IT-xx9
Technical data
Page 6 of 20
R. STAHL HMI Systems GmbH / OI_IT_xx9_en_V_01_00_01.docx / 19.12.2017
3
Technical data
Function / Equipment
OS-IT-479-2TX
OS-IT-579-2TX
General information
HMI-type
Operator station
Technology
Panel PC
Thin Client
Explosion protection
Application range (Zones)
non-Ex (safe area)
Electrical data
Processor
AMD GX-217GA
Processor details
AMD GX-217GA 1.65 GHz; Dual Core
Main memory
4 GB
Data memory
64 GB MLC
128 GB MLC
64 GB MLC
Graphics controller
AMD Radeon HD 8280E
Memory technology
SSD solid state flash drive
Operating System
Windows Embedded Standard 7 (64-Bit)
Windows 7 Ultimate (64-Bit)
Windows 10 (32-Bit and 64-Bit)
Windows 10 IoT Enterprise
Language support
via Windows operating system
HMI Image
-
Remote Firmware
Input voltage range
85
– 250 VAC
Nominal voltage range
100
– 240 VAC
Frequency range
50 - 60 Hz
Rated operational power
typ. 50 W (170 BTU)
Power consumption AC 1
1 A
Fuses AC
4 AT
Connections
via standard plug
Plug version AC
IEC plug (female)
Plug version USB
USB-A connector
Further connections
12 VDC Output
external on / off switch (pre-mounted at enclosure)
Loudspeaker output (optional)
Further connections - note
Only accessories approved by STAHL HMI may be connected to the 12 VDC output.
Plug version further connections
pluggable screw terminal, green, 6-pin 2.5 mm²
Fuses
2x 4A time-lag, 250 V
Ethernet / Data
2x 10/100/1000Base-TX
Interface medium
CAT7 Data transmission
USB interface
4x USB
Interface serial
2x RS-232
Interface audio
1 x Audio Line in / out
Connection impedance
12 W at 4 Ohm
Data cable
CAT7 installation cable AWG 23
Length of data cable
max. 100m
Minimum requirement connection cable
supply
3 x 1.5 mm²
Minimum requirement connection cable
Ethernet
CAT6
Real-time clock
Yes
Real-time clock data buffer
Lithium battery and capacitor buffered, maintenance-free
Battery type
B
R2032
Battery buffer
> 5 years
Capacitor buffer
at least 4 days
