Mounting and installation
14
213097 / 914760310010
2016-03-17 BA00 III en 07
Vibration Transducer Supply Unit
Series 9147
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
8.2.3 Mounting / dismounting on pac-Carrier
Mounting
Dismounting
8.2.4 Mounting / dismounting pluggable terminals
All devices are equipped with pluggable terminals.
Mounting
• Plug the terminal into the device until the terminal engages.
Dismounting
12613E00
• Remove the black and green terminals.
• For single-channel devices: remove the covering in
terminal slot 2 (between the black and the green
terminal).
15569E00
• Position the device on the pac-Carrier. Place the cut-out
of the enclosure on the outside edge of the pac-Carrier.
• When pivoting the device onto the pac-Carrier, make sure
that it is not set at an angle.
• Swivel in the device up to the red notch lever.
• Close red notch lever by applying diagonal pressure
on the lever with the thumb until the lever engages audibly
at the device.
• Ensure that the red notch lever is engaged.
15574E00
• Swivel out the notch lever using a screwdriver.
• Swivel device out of the slot.
10859E00
• Position the screwdriver behind the terminal.
• Push out the terminal.
