background image

212485 / 7579615300
2011-09-13·BA00·III·en·00

General Safety Instructions

3

SolConeX Plug
G579/12

4

General Safety Instructions

The devices must be used only for the intended purpose. Incorrect or impermissible use 
or non-compliance with these instructions invalidates our warranty provision. No changes 
to the device are permitted. Use the device only if it is undamaged and clean.

Observe the following information during installation and operation:

National and local safety regulations

National and local accident prevention regulations

National and local assembly and installation regulations

Generally recognized technical regulations

Safety instructions in these operating instructions

Characteristic values and rated operating conditions on the rating and data plates

Additional instruction plates fixed directly to the device

5

Conformity to Standards

The relevant standards are listed in the EC Declaration of Conformity.

6

Transport and Storage

Transport and storage are only permitted in the original packing.

 WARNING

Installation, maintenance, overhaul and repair may only be carried out by appropriately 
authorised and trained personnel. 

Содержание G579/12













Отзывы: