Operating Instructions ET-xx6-A
Assembly and disassembly
Page 30 of 60
R. STAHL HMI Systems GmbH / OI_ET_xx6_A_en_V_03_00_36.docx / 03.05.2021
11.4.2.2.3 Type 3 connection version
The USB device does require an external power supply to function because it uses over
500 mA (e.g. hard disks, CD / DVD drives).
The USB device is connected to the mains via other interfaces (e.g. USB / serial converter).
The USB device needs the VCC connection of the HMI device (internal supply
– terminal
1) to function.
Type 3 connection diagram (any USB device with power supply)
12 Assembly and disassembly
12.1 General information
Assembly and disassembly are subject to general technical rules.
Additional, specific safety regulations apply to electronic and
pneumatic installations.
12.2 Cut-out ET-xx6-A-*
Make a cut-out with the following dimensions:
HMI device
Width
Height
Depth of cut-
out
Material thickness
ET-x06-A-*
385.5 ± 0.5 mm
[1.26 ± 0.0016 ft]
257.5 ± 0.5 mm
[0.84 ± 0.0016 ft]
150 mm [0.49 ft]
up to 8 mm
[0.0087 ft]
ET-x16-A-*
359.5 ± 0.5 mm
[1.18 ± 0.0016 ft]
257.5 ± 0.5 mm
[0.84 ± 0.0016 ft]
150 mm [0.49 ft]
up to 8 mm
[0.0087 ft]
ET-x36-A-*
427.5 ± 0.5 mm
[1.40 ± 0.0016 ft]
327.5 ± 0.5 mm
[1.07 ± 0.0016 ft]
165 mm [0.54 ft]
up to 8 mm
[0.0087 ft]
ET-x56-A-*
522.5 ± 0.5 mm
[1.71 ± 0.0016 ft]
412.5 ± 0.5 mm
[1.35 ± 0.0016 ft]
165 mm [0.54 ft]
up to 8 mm
[0.0087 ft]
NOTICE
