Stahl EC-940-DUA Series, Инструкция по эксплуатации

Страница: 49 / 606

Instruc
tion manual - English - EN
47 MNTCMPXT_1824_EN
9.6.4.4 Preset Menu (Edit Preset)
It allows you to configure the following parameters:
1.
Number: The Preset number to be edited.
2.
Enabling:
Enabling preset.
3. Pan: Pan position in degrees.
4. Tilt: Tilt position in degrees.
5.
Zoom:
Zoom position.
6. Focus: Daytime and night-time position of the
focus.
7. Speed: The speed at which the position is
reached when preset is recalled from the Patrol
and Scan function.
8.
Pause:
Sets the dwell time in seconds before
starting the next movement in Patrol.
9.
Text:
The text that is displayed when the preset
position is reached.
EDIT PRESET
------------------------
1>NR. : 1
2 ON : N
3 PAN :+ 0.00
4 TILT :+ 0.00
5 ZOOM : 0
6 FOCUS: 4096 - 5600
7 SPEED: 100.0
8 PAUSE: 1
9 TEXT : Text 001
Fig. 87
From the menu it is possible to directly store the
preset by sending the Iris Close command that
enables the pan & tilt movements.
9.6.4.5 Preset Menu (Utilities Preset)
It allows you to configure the following parameters:
1.
Daytime A.Focus: Enables the use of the
autofocus when loading the preset in daytime
mode. To guarantee fast and accurate focusing
of the image, disable the automatic focus.
2. Night-time A.Focus: Enables the use of the
autofocus when loading the preset in night-time
mode. We advise enabling the automatic focus
when the pan & tilt is fitted with an infrared
illuminator, as the focal point varies depending
on whether the light is visible or infrared.
3.
Scan Speed:
This is the reference speed used
when a preset position is recalled by the Scan
function.
4. Default Speed: Changes the default speed
of the Presets. This value is used based on the
function Set Speed? to assign the same speed to
all Presets .
5.
Default Dwell Time:
Changes the default pause
of the Presets. This value is used based on the
function Set Dwell Time? to assign all Presets the
same pause time.
6.
Set Speed:
To assign all Presets the same default
speed.
7.
Set Dwell Time:
To assign all Presets the same
default dwell time.
PRESET UTILITIES
------------------------
1>AUTOFOCUS DAY : N
2 AUTOFOCUS NIGHT: Y
3 SCAN SPEED : 200.0
4 DEFAULT SPEED : 100.0
5 DEFAULT DWELL : 3
6 SET SPEED?
7 SET PAUSE?
Fig. 88