Stahl 9475/33-08-0 Series, Руководство по эксплуатации, Страница: 43 / 47

218140 / 9475612310
2019-01-18·BA00·III·en·02
Maintenance, Overhaul, Repair
21
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Digital Output Module 8-Channel Version
for Zone 2
Series 9475/33-08-.0
11.2 Overhaul
The device does not require regular maintenance.
11.3 Repair
11.4 Returning the Device
• Only return or package the devices after consulting R. STAHL!
Contact the responsible representative from R. STAHL.
R. STAHL's customer service is available to handle returns if repair or service is required.
• Contact customer service personally.
or
• Go to the r-stahl.com website.
• Under "Support" > "RMA", select "RMA - Request".
• Fill out the form and send it.
Confirmation will be sent. R. STAHL's customer service will contact you.
You will receive an RMA form after speaking with customer service.
• Send the device along with the RMA form in the packaging to
R. STAHL Schaltgeräte GmbH (refer to chapter 1.1 for the address).
If the blue "M/S" LED lights up continuously, it is recommended to replace the
module in the near future. Otherwise the likelihood of failure will increase after
12 months (see the "Indications" and "Troubleshooting" sections).
Observe the relevant national regulations in the country of use.
DANGER
Explosion hazard due to improper repair!
Non-compliance results in severe or fatal injuries.
• Repair work on the devices must be performed only by
R. STAHL Schaltgeräte GmbH.