Stahl 9475/33-08-0 Series, Руководство по эксплуатации, Страница: 35 / 47

218140 / 9475612310
2019-01-18·BA00·III·en·02
Technical Data
13
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Digital Output Module 8-Channel Version
for Zone 2
Series 9475/33-08-.0
For further technical data, see r-stahl.com.
Technical Data
Indication
LED indication
Module requires
maintenance
LED "M/S", blue
Operating state LED "RUN", green
Group error LED "ERR", red
Function indication
Retrievable
parameters
Manufacturer, Type, hardware revision, software revision, serial number
Error indication
Module status and
alarms
• Internal bus error primer / redundant
• No response from IOM
• Configuration does not correspond to module
• Hardware error
• Excess temperature
• Slot error
• Module requires maintenance
Signal errors for
each channel
Signal status bit "0" = output high-impedance / "1" = output is supplied
Wire breakage
output
> 12 kΩ
(with deactivated test current can be detected only if the output is switched on)
Short circuit
output
< 30 Ω (response range 30 to 60 Ω)
(can be detected only if the output is switched on)
Mounting / Installation
Mounting orientation horizontal or vertical (observe operating instructions)
Mounting type
on 35 mm DIN rail LV 35/15 (DIN EN 60715)