Stahl 9170/12-12-13, Руководство по эксплуатации

Страница: 7 / 16

english Operating Instructions
Switching Repeater Type 9170/*2
6 Arrangement and fitting
6.1 Dimensions
6.2 Installation
The switching repeater is to be installed outside of hazardous areas.
6.3 Mounting and dismounting
a) Detachable terminals
All devices are provided with detachable terminals. A screwdriver is needed to
remove the terminals (as shown in the picture).
b) Mounting on DIN rails fitted with a pac-Bus
As depicted in the photo, set the device in position on the pac-Bus (already
mounted on the DIN rail) and tilt/snap until it locks in.
Do not tilt at an angle to either side when snapping onto the pac-Bus.
Note: In order to prevent pole reversal during installation, the pac-Bus elements
have been equipped with a keyed connection plug (see photo). The module is
fitted with a matching slot.
c) Connection of ground
The connection of ground to the switching
repeater is mandatory in order to achieve proper
explosion protection.
Please mount the terminal set 9194/50-01 as
illustrated in picture on the right side. Please
connect a ground connection of # 16 AWG to
terminal 2 of the terminal set.
Screw terminals
Operating Instructions
Switching Repeater Type 9170/*2
7
All devices are provided with detachable terminals. A screwdriver is needed to
Bus (already
Bus elements
have been equipped with a keyed connection plug (see photo). The module is
Dimension X
Screw terminals 108 mm