Stahl 9170 1 Series, Руководство пользователя

Страница: 29 / 43

200089 / 9170612310
2020-04-30·BA00·III·en·09
Mounting and Installation
9
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Switching repeater
Series 9170/.1
6.1.3 Mounting / Dismounting of the Device on DIN Rail and pac-Bus
Mounting on DIN rail
06886E00

Position the device on the DIN rail. Position the cut-out of the enclosure on the
outside edge of the DIN rail.

Engage the device on the DIN rail.

When swivelling the device onto the DIN rail, make sure that it is not set at an angle.
Mounting on pac-Bus
15554E00
The pac-Bus is equipped with a polarisation guide and the device with a matching
polarisation slot.

Position the device as shown in the illustration. Position the cut-out of the enclosure on the
outside edge of the DIN rail.

Engage the device on the pac-Bus.
Dismounting
06881E00

Pull out the base bolt slightly using a screwdriver.

Swivel out the device.