155973 / 8604601300
2015-04-08·BA00·III·en·03
Mounting and installation
9
Rotary actuators
Series 8604/1
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Standard switch:
16246E00
• Set the rotary actuator (1) to position
"0" (OFF).
• Insert the coupling piece (2) into the
groove of the rotary actuator (1).
• Mount the plate (3) on the pins of the
rotary actuator (1) (For a rotary
actuator size 3 the plate (3) is replaced
by a bracket).
• Put the disc (4) and the coupling piece
(2) on the plate (3) so that they are
flush with each other. (For disc (4) a
bracket or for a rotary actuator size 3 a
rectangular plate can be used). Make
sure that the rotary actuator is in posi
-
tion "0".
• Turn the rotary actuator over. Make
sure that the rotary actuator points to
the right when it is in its "0" position.
• Also place the enclosure cover on the
rotary actuator in reversed position and
assemble the rotary actuator using the
screws (7), the split washer (6) (V tooth
lock washer in case of plastic
enclosure) and the washer (5). For a
plastic enclosure, a metal ring can be
used instead of a washer (5).
5 6
7
2
3
4
1
