Stahl 8562/54-246 Series, Руководство по эксплуатации

Страница: 23 / 30

Arrangement and Assembly
8
149915 / 8562606300
2012-08-16·BA00·III·en·06
Residual current circuit-breaker with
integral overcurrent protection
8562/5
7 Arrangement and Assembly
7.1 Mounting Orientation
Type 8562/5 8562/54-246.-...

8562/54-247.-...

8562/54-248.-...
Auxiliary contact
Version see circuit diagrams see circuit diagrams
Rated working voltage max. 255 V AC max. 255 V AC
Rated working current 5 A at 230 V AC

1 A at 60 V DC
2 A at 230 V AC

1 A at 400 V AC

2 A at 60 V DC
Coupling relais
Coil tension U
B
220 V --
Minimum switching
current 10 mA --
Minimum switching
current 5 A --
Switching capacity min. 250 mW --

Please contact the manufacturer if operating conditions are non-standard.

Further technical data is given in the STAHL catalogue or is available upon request.

The temperature class depends upon where the protective enclosure is installed.

Change the Miniature Circuit-Breaker at the end of its service-life to guarantee ongoing
protection!

Upstream fuse/downstream Miniatur Circuit-Breaker for back-up protection

I
cc max
: 100 kA (80 kA, 400 V with fuse)
These circuit-breakers are explosion-protected devices to IEC/EN 60079-0.

They must be fitted into an enclosure with type of protection increased safety “e“, e.g.
enclosure Type 8146/5 from R. STAHL Schaltgeräte GmbH.
04934T00
Vertical,

Handle at the bottom