Stahl 8208/1 Series, Руководство по эксплуатации

Страница: 21 / 23

140759 / 8208602300
2014-04-14·BA00·III·en·01
Operation
9
Control unit
Series 8208/1, 8208/2
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
9 Operation
The control unit 8208 is actuated by means of an actuator series 8602.
10 Maintenance and Repair
10.1 Maintenance
• Consult the relevant national regulations to determine the type and extent of
inspections.
• Adapt inspection intervals to the operating conditions.
During maintenance of the device, check at least:
• if the conductors are clamped properly,
• compliance with the permissible temperatures (according to EN 50014),
• if the enclosure and seals are damaged.
10.2 Maintenance
10.3 Repair
WARNING
Unauthorized work being performed on the device!
Risk of injuries and material damage!
• Work performed on the device must only be carried out by
appropriately authorized and trained personnel.
WARNING
Danger due to live components!
Risk of severe injuries!
• All connections and wiring must be disconnected from the
power supply.
• Secure the connections against unauthorized switching.
Observe the relevant national regulations in the country of use.
DANGER
Danger due to improper maintenance/repair!
Explosion protection is impaired!
• Repair work on the device must be performed only by
R. STAHL Schaltgeräte GmbH.