Stahl 8188 Series, Руководство по эксплуатации

Страница: 50 / 52

Maintenance, Overhaul, Repair
24
226774 / 8188603300
2021-07-09·BA00·III·en·05
DE
EN
FR
IT
ES
RU
NL
DK
SE
FI
PT
GR
PL
CZ
SK
HU
SL
RO
BG
LV
LT
EE
CH
KR
CN
Busbar system
Series 8188
9 Maintenance, Overhaul, Repair
9.1 Maintenance
• Consult the relevant national regulations to determine the type and extent of
inspections.
• Tailor inspection intervals to the operating conditions; inspections must be performed
at least every three years.
At a minimum, check the following points during maintenance on the device:
• Whether the clamping screws holding the electrical lines fit securely
• Whether the device enclosure has cracks or other visible signs of damage
• Whether the permissible temperatures are complied with (according to IEC/EN 60079)
• Ensure it is being used as intended.
9.2 Overhaul
9.3 Repairs
9.4 Returning the Device
• Only return or package the devices after consulting R. STAHL!
Contact the responsible representative from R. STAHL.
R. STAHL's customer service is available to handle returns if repair or service is required.
• Contact customer service personally
or
• Go to the r - stahl.com website.
• Under "Support" > "RMA" > select "RMA-REQUEST".
• Fill out the form and send it.
You will automatically receive an RMA form via email. Please print this file off.
• Send the device along with the RMA form in the packaging to
R. STAHL Schaltgeräte GmbH (refer to chapter 1.1 for the address).
Observe the relevant national regulations in the country of use.
DANGER
Explosion hazard due to improper repair!
Non-compliance results in severe or fatal injuries.
• Repair work on the devices must be performed only by
R. STAHL Schaltgeräte GmbH.