Cleaning
18
264820 / 6050628300
2018-07-24·BA00·III·en·01
Universal spotlight LED
Series 6050/6
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
9.3
Repair
9.4
Returning the device
• Only return or package the devices after consulting R. STAHL!
Contact the responsible representative from R. STAHL.
R. STAHL's customer service is available to handle returns if repair or service is required.
• Contact customer service personally.
or
• Go to the www.r-stahl.com website.
• Under "Support" > "RMA form", select "Request RMA slip".
• Fill out the form and send it.
Confirmation will be sent. R. STAHL's customer service will contact you.
You will receive an RMA slip after speaking with customer service.
• Send the device along with the RMA slip in the packaging to
R. STAHL Schaltgeräte GmbH (refer to Section 1.1 for the address).
10
Cleaning
• Clean the flameproof joints regularly with an acid-free grease that is compatible with
aluminium.
DANGER
Explosion hazard due to improper repair!
Non-compliance results in severe or fatal injuries.
• Repair work on the devices must be performed only by
R. STAHL Schaltgeräte GmbH.
DANGER
Explosion hazard due to damaged joints when cleaning!
Non-compliance results in severe or fatal injuries.
• Only treat corroded joints with high-quality, chemical cleaning agents
(e.g. with Esso reducing oils, type Vassol or similar products).
• Do not use any abrasives or wire brushes for cleaning.
• Do not apply any colour.
