Stahl 145789, Руководство по эксплуатации

Страница: 16 / 20

Commissioning
6
145955 / 8510601300
2011-11-21·BA00·III·en·02
Control Unit
8510/1
9 Commissioning
Before commissioning the control unit ensure that
 it has been installed according to standards
 it is not damaged
 connection has been made correctly
 all screws and nuts are fully tightened
 no part of the flameproof enclosure is damaged
10 Repairs and Maintenance
Repairs and maintenance work on the control units may only be carried out by

appropriately authorised and trained personnel.
Before work commences the control units must be disconnected from the mains.
The following points must be checked during maintenance:

clamping screws holding the cables are securely seated

cracks in plastic enclosures
11 Accessories and Spare Parts
12 Disposal
Observe the national standard for refuse disposal.
WARNING
Observe the relevant national regulations in the country of use!
WARNING
Use only original spare parts as well as original accessories made by R. STAHL

Schaltgeräte GmbH.

We are pleased to answer any special questions you may have.

Please contact your nearest R. STAHL representative.