Istruzioni, instructions
22
Preliminary checks
Check the following points before starting to install Alpheo:
•
Check that the gate structure is sufficiently sturdy and there are no points of friction.
•
Check the condition of the gate hinges and make sure they are adequately lubricated.
•
Make sure there is a mechanical stop in closing to prevent the gate going beyond its
travel;
Fixing the brackets to the post and gate (Figures 1 and 2)
After having verified the optimum conditions for installation, fix the Base Plate to the post using
14
∅
plugs and M8 screws, observing the minimum distance of 100 mm from the ground. Lock
the fastening plate to the gate with M6 screws, observing the values indicated and those
specified in table 1
.
Figure 1
