19
Maintenance
Before doing maintenance, please make sure that the power is cut, the
power cord is unplugged, and the machine itself has cooled down.
The maintenance must be done by qualified person.
1.
When the snow machine is idle and does not work, it is
recommended to empty the tank and make a cleaning procedures:
put the water into the tank, in accordance with spray snow
operation to clean the interior of the snow machine until the water
is almost no foam so far;
2.
The fluid is not allowed to get dirty. Be sure to always clean or
replace the caps on the tank (Replace the caps on the tank directly.
This kit includes quick connector, cap, pipe and filter) and tight the
cover of the snow machine tank immediately after filling;
3.
Remove the black cloth of the nozzle, cleaning or replacement of
the nozzle, the nozzle need to maintain unobstructed;
Exit black cloth
Core spring
Nozzle
Clip out the black tie band of the spring and
the exit cloth at the end and take out the spring
and the exit cloth.
Metal nozzle
Clip out the black tie band on the
metal nozzle and remove the nozzle
for cleaning.
Method of removing the core
spring and exit black cloth
Method of removing
the metal nozzle
