13
Operation
Plug mains power cord from the snow machine into appropriate
power supply socket;
Regardless of the machine in which mode, the main
display information as shown on the left:
--FN20--:
shows lighted mode of the display.
H:
shows the state of air volume, as shown in Figure H
that air volume is 50%.
Vx:
shows the current set of snow volume, as shown in
Figure V1 that snow volume of 1%.Please do follow the
required operating modes;
Panel Continuous Snow Mode Operation ....................................
“Manual ON/OFF” control, when the external controller or DMX signal
is not connected.
— — FN2.0 — —
H>>>V1
Press MENU to select the SNOW status; use Up/
Down button to switch fixed volume (=V1~100)
and random volume (=Auto). The left icon is SNOW
in Auto volume;
The display information as shown on the left:
--FN20--:
shows lighted mode of the display.
H:
shows the state of air volume, as shown in
Figure H that air volume is 50%.
Vx:
shows the current set of snow volume, as
shown in Figure V100 that snow volume of 100%;
Press MENU to select the WIND status; use Up/
Down button to switch air volume. There are
three changes: Half =50%,Full=100%, and Auto=
random volume. The left icon is WIND (air volume)
in Auto volume;
SNOW
AUTO
WIND
AUTO
1.
2.
3.
Press Manual ON/OFF button to start snow spray; LED upper the button flashes;
— — FN2.0— —
H>>>V100
4.
