16
DMX Control Operation ..................................................................
DMX MODE
1 CH
DMX ADDR
5
3.
4.
1.
Connect the DMX 512 controller cable to the input socket (Figure 1-P or R)
of the snow machine unit. Make sure the signal cable polarity is correct.
When DMX socket receives effective DMX signals, the machine enter DMX
control mode automatically;
2.
There are 3 DMX modes for choice; 1CH, 3CH, & 5CH, please choose the
DMX mode by MENU
5.
If desired, connect another snow machine: Plug one end of another signal
cable in to the output socket (Figure 1-O or Q) on the back of the first
BURAN 1300
; plug the other end of the signal cable to the input socket
(Figure 1-P
or R) on the back of the second
BURAN 1300
. Follow the same
procedure to link more snow machines, if desired; whole link is daisy chain;
6.
Down. Refer to DMX channel chart in Figure 2 make related settings.
Now
start operating
BURAN 1300
with DMX console.
Press MENU to select the DMX Mode status;
use Up/Down button to switch 1CH, 3CH and 5CH.
Save automatically after the set;
Press MENU to select the DMX ADDR status;
press Up/Down button to set the DMX address.
Save automatically after the set;
Set values are automatically saved.
link more
snow machines
MT-4
