Staco Energy UniStar C, Руководство пользователя

Страница: 24 / 47

23
(
6) The start-up sequence of the UPS is complete as illustrated as drawing E.
Make sure the UPS is plugged onto the wall receptacle for at least 8
hours to ensure the batteries are fully charged. To
turn off the UPS
press and hold the Off switch until the alarm beeps twice, then release the
switch. The UPS will shut down a few seconds later.
4.4.1.1 Start-up in Battery Mode (Cold Start)
(1) Make sure the UPS has fully charged batteries installed.
(2) Press the UPS On switch for approx. 3 seconds until the audible alarm
sounds twice, then release the On switch. The LCD display will change
from Drawing A to drawing G.
G
(3) Press the UPS On switch of the UPS a second time for approx. 3
seconds until the audible alarm sounds twice, then release the On switch.
Failure to press the On switch a second time within 10seconds will cause
the UPS to shut off. The LCD display changes from drawing G to
drawing H, then the UPS will be in self-test Mode. The Inverter will
supply voltage to the output within 1 minute, and the LCD display changes
to drawing I.
H
I