Stack DVR2-130, Руководство пользователя

Страница: 28 / 55

Chapter 6. Configuration
22 Stack DVR2 Users Guide
The DVR Configuration Utility will now recognise the
DVR2 and show that it has established a connection.
Once connected the DVR2 Status Lamp will flash 50:50 red /
green to indicate that it is under control of the DVR
Configuration Utility.
! The DVR Configuration Utility is only able to establish
connection with the DVR2 when it is powered-up.
Read Config
Clicking this button causes the current configuration to be
uploaded from the DVR2 to the PC.
Write Config
Clicking this button causes the new configuration to be
transferred from the PC to the DVR2. The DVR
Configuration Utility status will show “Waiting for
connection” while the DVR reboots with the new
configuration.
Factory Reset
Clicking this button causes the DVR2 to reset back to its
manufacturing default settings. It should only be necessary
to do this in the unlikely event that the DVR2’s internal set-
up has become corrupted.
Once you have clicked the Factory Reset button, a dialog box
will pop up and you must confirm the reset operation by
clicking the “Yes” button.
Finally write this default configuration to the DVR2 using
the method outlined above (see page 22).
Exit
Clicking this button closes the DVR Configuration Utility. If
the configuration has been modified, you will be prompted to
write the new configuration to the DVR2.