THE BARREL RESTS MUST BE INSTALLED BEFORE
MOUNTING THE CABINET TO A WALL AND FLOOR.
INSTALLATION OF BARREL RESTS
PLANNING YOUR CABINET CONFIGURATION
On the outside and rear walls of the left and right
compartments, you can install barrel rests which will
support (9) guns on each side.
The adjustable shelves can be mounted at (3) positions in
the left or right compartments. Notice that when the barrel
rest is mounted to the side of the cabinet, even when the
shelving is installed, two of barrel rest positions extend in
front of the shelves which allow you to store guns in front of
the shelves.
Install the 4-position barrel rests (A) to the back of the cabinet
and the 5-position barrel rests (B) to the sides of the cabinet
as shown in figure 2.
Thread the screws into the pilot holes from the outside of
the cabinet. Align the holes of the barrel rest over the tips
of the screws and lightly press the barrel rest into place.
Now tighten the screws from the outside of the cabinet.
Tighten each screw partially, alternating from one screw to
the other until they are both tight. Do not over tighten. (See
figure 1)
Installation of Barrel Rests
1
2
A
B
18
2
40141-
2109