To assemble two shelves at the same height, assemble the
shelves as shown. It is important to note that you will be
using the same screw to support both shelves through the
Center Partition.
Tip: It may be useful to work from the left side of the
cabinet and work towards the right side. We recommend
not tightening the screws until both your shelves are in
place.
Side By Side Shelf Assembly
SELECTING A LOCATION
16"
CENTERS
CABINET
TOP VIEW
MINIMUM
The cabinet must be mounted to wall studs and the floor.
For optimal safety and security, the cabinet should be
installed adjacent to the side wall of a closet with minimal
space on either side of the cabinet, in an isolated, dry
and secure area. The cabinet should be flat against the
wall at the back of the unit, as well as flat on the floor.
Remove the baseboard if necessary.
THE CABINET SHOULD ALWAYS BE KEPT OUT OF
THE REACH OF CHILDREN.
Insert the plastic plugs in the cabinet's top mounting
holes if you are not installing the a Pistol-Ammo cabinet
on the top of the security cabinet.
After selecting the configuration that fits your needs, load
the cabinet with your guns and equipment. If you are
satisfied with your cabinet configuration, proceed with
mounting the cabinet to the wall and floor as described later
in these instruction.
18
4
40141-
2109
SECURING THE CABINET
Before you install the cabinet to a wall and the floor, install
the interior components as described in the assembly
instructions.
NOTE: This cabinet must be mounted to wall studs and
the floor. Failure to do so will compromise the safety
and security of the cabinet.
NOTE: The cabinet must be secured to wall studs in the top
holes in the back of the cabinet so that it is anchored to the
wall studs in two locations. The cabinet must also be
mounted to the floor. Use the hardware provided or consult
your hardware retailer for fastening hardware for your
particular mounting surfaces
Choose appropriate mounting hardware (not included) to
affix the cabinet to the wall and floor.
