Stack-On QAS-1514-B Скачать руководство пользователя страница 4

Страница: 4 / 15

REMOVING THE SAFE FROM THE

MOUNTING BRACKET

40667-1512

4 15

Mounting

Bracket

Thumb nuts

OPENING THE SAFE USING YOUR

FINGERPRINT

To open the safe, press the scanner with a recorded

finger. The blue light will come on with one beep

(if the sound is turned on) and the scan will begin.

If the green light flashes twice with 2 beeps (if the

sound is turned on), the scan has been accepted

and the door will open.
If the red light flashes once, the scanner did not

read your fingerprint and you must try again. If the

red light flashes 3 times, the scanner read your

fingerprint and did not accept it.

If there are 3 rejected scans, where your

fingerprint was read, and the red light flashes 5

times with 5 beeps (if the sound is turned on),

you will have an automatic lockout for 60

seconds before you can try a scan again. The safe

will beep one time (if the sound is turned on)

and the green light will flash once when the

lockout period is over.
If there is 1 more rejected scan where your

fingerprint was read and the red light flashes 5 times

with 5 beeps (if the sound is turned on), you will

have an automatic lockout for 5 minutes before you

can try a scan again. The safe will beep one time (if

the sound is turned on) and the green light will flash

once when the lockout period is over.

To close the safe, push the door closed until

locked.

TURNING THE SOUND OFF/ON

CLEARING THE MEMORY

To turn the sound off, press the scanner with a

recorded fingerprint for 10 seconds until the green

light flashes twice.

To turn the sound on, press the scanner with a

recorded fingerprint until you hear two beeps and

the green light flashes twice.

Your safe comes with the beep sound turned on.

To clear the memory of all recorded fingerprints,

locate the reset button on the inside of the safe

and press this button for about 5 seconds until

the green light flashes 10 times with 10 beeps (if

the sound is turned on). All recorded scans will

be erased.

NOTE: For security you must record a

fingerprint. Failure to do so will compromise

the safety and security of the safe.

Open the holster compartment as described in the

Installing the Battery section. When the holster

compartment has been released from the frame and

the L brackets have been rotated so they are flat

against the back of the holster compartment, locate

2 nuts which are located in the bottom of the safe

body. Remove the 2 nuts and washers using your

fingers and lift the safe off the tabs in the back of the

sleeve.

There are some securing tabs on the mounting

sleeve that guide the back of the safe into position -

you will need to make sure you have maneuvered the

safe out of these tabs.

Содержание QAS-1514-B
















Результаты поиска

Содержание QAS-1514-B

Отзывы:

Похожие инструкции для QAS-1514-B

Бренды по названию

Популярные бренды

Stack-On QAS-1514-B, Инструкция по эксплуатации

Результаты поиска

Содержание QAS-1514-B

Отзывы:

Похожие инструкции для QAS-1514-B

Бренды по названию

Популярные бренды