40707-1608
4 14
TURNING THE SOUND OFF/ON
CLEARING THE MEMORY
To turn the sound off, press the scanner with a
recorded fingerprint for 10 seconds until the green
light flashes twice.
To turn the sound on, press the scanner with a
recorded fingerprint until you hear two beeps and
the green light flashes twice.
Your safe comes with the beep sound turned on.
To clear the memory of all recorded fingerprints,
locate the reset button on the inside of the safe
and press this button for about 5 seconds until
the green light flashes 10 times. All recorded
scans will be erased.
NOTE: For security you must record a
fingerprint. Failure to do so will compromise
the safety and security of the safe.
OPENING THE SAFE USING YOUR
FINGERPRINT
To open the safe, press the scanner with a recorded
finger. The blue light will come on with one beep (if
the sound is turned on) and the scan will begin.
If the green light fashes twice with 2 beeps (if the
sound is turned on), the scan has been accepted
and the drawer will open.
If the red light flashes once, the scanner did not read
your fingerprint and you must try again. If the red
light flashes 3 times, the scanner read your fingerprint
and did not accept it.
If there are 3 rejected scans, where your
fingerprint was read, and the red light flashes 5
times with 5 beeps (if the sound is turned on),
you will have an automatic lockout for 60
seconds before you can try a scan again. The
safe will beep one time (if the sound is turned
on) and the green light will flash once when the
lockout period is over.
If there is 1 more rejected scan where your
fingerprint was read and the red light flashes 5 times
with 5 beeps (if the sound is turned on), you will
have an automatic lockout for 5 minutes before you
can try a scan again. The safe will beep one time (if
the sound is turned on) and the green light will flash
once when the lockout period is over.
