4
Install the Casters
WARNING
Excessive Weight Hazard
Use two or more people to move, assemble or install
cabinet.
Failure to do so can result in back or other injury.
TALL STORAGE CABINET: ASSEMBLY INSTRUCTIONS
1.
Close the cabinet doors.
2.
Using two or more people, lay the cabinet on its side with the
bottom facing your work area. Be careful the doors do not
swing open when moving or proceeding with caster installation.
3.
Preassemble the screw and nut to the caster.
4.
Insert the carriage flat-head bolts into the keyhole slots and
slide the bolts into place as shown.
5.
Position the two rigid casters over the bolts in the front of the
cabinet location, with the brakes toward the inside, and start
four self-locking nuts for each caster.
6.
Hold the casters in place making sure the bolts are seated in
the narrow ends of the keyhole slots. Tighten the self-locking
nuts with a
⁷⁄₁₆
" wrench.
(Do not overtighten)
7.
To attach the two swivel casters to the rear caster location,
repeat steps 2 and 3.
8.
Return the cabinet to its upright position.
Front of cabinet
Bottom of cabinet
Caster plate
Tools and Parts
Gather the required tools and parts before starting installation.
Tools Needed:
Parts Supplied:
Unpack the Cabinet
NOTE: Keep the packing materials to cushion the cabinet during
assembly and then dispose of/recycle all packaging materials.
1. Verify contents. See “Parts Supplied.”
⁷⁄₁₆
" Wrench
Swivel casters (4)
¹⁄₄
" - 20 Self-locking nuts
(16)
¹⁄₄
" - 20 x
¹⁄₂
" Carriage flat-head bolts (16)
Install the Door Handles
1. Open the doors.
2. Insert Phillips head screws through holes in door.
3. Align door handles with screws and tighten.
(Do not overtighten)
4. Repeat this procedure for the other door handle.
........
..
........
..
.......
...
........
..
Phillips screwdriver
GCTL-4SF-BB
GCTL-4SF-BR
Models
B
C
D
A. Brake caster
B. Rear caster
D. Front of cabinet
C. Caster plate
A
