2
BASE CABINET: ASSEMBLY INSTRUCTIONS
Install the Casters
WARNING
Excessive Weight Hazard
Use two or more people to move, assemble or install
cabinet.
Failure to do so can result in back or other injury.
1.
If equipped with drawers, push in completely to lock in place.
2.
Close the cabinet doors.
3.
Using two or more people, turn the cabinet upside down.
4.
Preassemble the screw and nut to the caster.
5.
Insert the carriage flat-head bolts into the keyhole slots and
slide the bolts into place as shown.
6.
Position the two brake casters over the bolts in the front
cabinet location, with the brakes toward the outside, and start
four self-locking nuts for each caster.
7.
Hold the casters in place making sure the bolts are seated in
the narrow ends of the keyhole slots. Tighten the self-locking
nuts with a
⁷⁄₁₆
" wrench.
8.
To attach the two swivel casters to the rear caster location,
repeat steps 2 and 3.
9.
Return the cabinet to its upright position.
10. Place the top mat with the textured side facing up.
GCB-2SF-BB
GCB-2SF-BR
GCB-3DR-BB
GCB-3DR-BR
Tools and Parts
Gather the required tools and parts before starting installation.
Tools Needed:
Parts Supplied:
Unpack the Cabinet
NOTE: Keep the packing materials to cushion the cabinet during
assembly and then dispose of/recycle all packaging materials.
1. Verify contents. See “Parts Supplied.”
⁷⁄₁₆
" Wrench
Top mat (1)
Swivel casters (4)
¹⁄₄
" - 20 Self-locking nuts (16)
¹⁄₄
" - 20 x
¹⁄₂
" Carriage flat-head bolts (16)
Handels (2)
Models
B
C
D
A. Brake caster
B. Rear caster
D. Front of cabinet
C. Caster plate
A
