25
Indications on the display
1 Signal indicator:
bar display of the signal strength
Signal strength
Indicator
Warning
Perfect
Good
No signal
OUT OF RANGE
2 Channel/camera number display
The camera included in the set is automatically assigned to the transmission channel 1 (CAM1).
But, additional cameras (optional) have to be assigned manually to the channel numbers 2 to 4
(see submenu
pairing
). You can switch manually between the available cameras by pressing the
channel up/down key, for an automatic change press the quad-display button.
3 New record icon
When a new recording file is finished the yellow icon
New Record
will appear flashing, it turns
off automatically after playing the recording.
If the capacity of the SD card (max. 32 GB) is exhausted the
New Record
icon will flash red.
4 SD card icon
The SD card icon appears on the display when a SD card is inserted into the card slot.
5 Overwrite icon
When the overwrite function is activated the icon appears in the display.
6 Record icon
If a recording is started (either manually or automatically via timer, PIR sensor or Video Motion
Dectection) the red
=
REC
icon appears in the display. Below the icon, the name of the log file
appears (consisting of time and camera number).
No Signal
warning
When the monitor does not receive any signal from the camera (range is exceeded/camera turned
off) the warning
OUT OF RANGE
appears in the display.
Reduce the distance between camera and monitor (or turn on the camera).
Features
Night Vision
16 high-performance infrared LEDs allow transmission of pictures even in low light conditions
(picture on the screen is black/white then). Due to the integrated light sensor in the front the night
vision function will be automatically switched on in low light condition.
Camera switching function
For automatic switching (every 5 sec.) between the available cameras press the
button, to
deactivate this function press the
key.
To manually switch between the available cameras press one of the
/
keys.
Press the
quad-display key
twice to activate the quad mode (simultaneous display of all
available cameras on the monitor).
