Note:
The channel is always current during sub-code scan. If any
signal is received the unit locks on to that channel for 5 seconds and
is set to the last scanned sub-code.
Setting the DW (Dual Watch) Function
This unit is capable of monitoring two channels (main channel, and
the DW channel) in the standby mode. To activate the Dual watch
mode:
In normal mode, press the / button 7 times, the
DW
icon will be
displayed and channel digit start blinking on the LCD Screen.
Press the
CH
s
or
t
button to select the DW (dual watch) channel
(1~8, the main channel).
Once Dual Watch is on, the radio automatically scans both channels
and stops if a signal is received. Dual Watch restarts when the carrier
disppears.
Press the (Enter) button to confirm your selection and return to the
normal mode.
In the normal mode, the LCD screen will alternately display the Main
and the DW channel numbers. Whereby the CTCSS code is applicable,
the user must set first the CTCSS code number prior to setting the
DW channel number.
Note:
When the Dual Watch function is activated, the VOX function
will be temporarily disabled until the Dual Watch mode is turned OFF.
Changing the Call-Ring tone
You can use the Call-Ring tones to alert the other user/s or to identify
yourself. The PMR is equipped with 5 different types of Call-Ring tones.
To change the Call-Ring tone setting, in normal modes;
Press the / button 8 times, the (Call-Ring tone icon) will be
displayed on the LCD Screen and the current Call-Ring tone number
will start blinking.
While the Call-Ring tone icon is blinking, press the
CH
s
or
t
button
to change the setting. A respective Call-Ring tone sound will be played
when changing from one tone to another.
31
