ST ST7735R Скачать руководство пользователя страница 14

Страница: 14 / 164

ST7735R

V0.2

2009-08-05

WRX

(D/CX)

-Write enable in MCU parallel interface.

-In 4-line SPI, this pin is used as D/CX (data/ command selection).

-If not used, please fix this pin at VDDI or DGND level.

MCU

D[17:0]

I/O

-D[17:0] are used as MCU parallel interface data bus.

-D0 is the serial input/output signal in serial interface mode.

-In serial interface, D[17:1] are not used and should be fixed at VDDI or

DGND level.

MCU

-Tearing effect output pin to synchronies MCU to frame rate, activated

by S/W command.

-If not used, please open this pin.

MCU

OSC

-Monitoring pin of internal oscillator clock and is turned ON/OFF by

S/W command.

-When this pin is inactive (function OFF), this pin is DGND level.

-If not used, please open this pin.

Note1. When in parallel mode, no use data pin must be connected to “1” or “0”.

Note2. When CSX=”1”, there is no influence to the parallel and serial interface.

Содержание ST7735R





































































































































































Результаты поиска

Содержание ST7735R

Отзывы:

ST ST7735R, Руководство пользователя, Страница: 14 / 164

Результаты поиска

Содержание ST7735R

Отзывы: