DocID017768 Rev 4
27/39
UM0979
Supported commands
39
Note:
IR: interrupt byte; FC: FIFO control register; FS: FIFO source register.
4.2.3
Analog output accelerometers: supported commands
Table 7
below lists the commands supported by the devices/demonstration boards including
an analog output accelerometer:
*fifobts
(1)
Accelerometer “Bypass-to-Stream” enable
st 0 0 0 0 0 0 IR FC FS
*fifodstr
(1)
Accelerometer “Dynamic Stream” enable
st 0 0 0 0 0 0 IR FC FS
1. Available only for devices with embedded FIFO.
Table 6. Digital output accelerometers: supported commands list (continued)
Command
Description
Returned value
Table 7. Analog output accelerometers: supported commands list
Command
Description
Returned value
*setdbXXXVY
Selects firmware according to the adapter
connected
*start
Starts continuous data acquisition
(see
Table 4
)
*debug
Returns the output data in readable text
format
(see
Table 5
)
*stop
Stops data acquisition
*Zon
Forces 3-state
*Zoff
Exits from 3-state
*dev
Device name
e.g.: LIS3DH
*ver
Firmware version
e.g.: V1.0
*single
It gets a single X, Y, and Z data acquisition
(see
Table 5
)
*list
Prints the list of MKIs supported
e.g.: MKI105V1
*listdev
Prints the list of devices supported
e.g.: LIS3DH
*echoon
Activates the write verbose mode
e.g.: RAAhDDh
*echooff
Deactivates the write verbose mode
*PDON
Sets power-down pin
*PDOFF
Clears power -down pin
*STON
Sets self test pin
*STOFF
Clears self test pin
*FSON
Sets full scale pin
*FSOFF
Clears full scale pin
