manualshive.com logo in svg

ST eMotion, Руководство пользователя

Поделиться
Скачать
ST eMotion Скачать руководство пользователя страница 25

DocID017768 Rev 4

25/39

UM0979

Supported commands

39

Magnetometer FIFO mode enable

The *mfifomde command is used to enable the magnetometer FIFO mode.

Magnetometer FIFO stream mode enable

The *mfifostr command is used to enable the magnetometer FIFO stream mode.

Magnetometer Stream to FIFO mode enable

The *mfifostf command enables the magnetometer Stream-to-FIFO mode.

Magnetometer Bypass to FIFO mode enable

The *mfifobtf command is used to enable the magnetometer Bypass-to-FIFO mode.

Magnetometer Bypass to Stream mode enable

The *mfifobts command is used to enable the magnetometer Bypass-to-Stream mode.

Magnetometer Dynamic Stream mode enable

The *mfifodstr command enables the magnetometer Dynamic Stream mode.

Pressure sensor FIFO reset enable

The *pfiforst command enables the pressure sensor FIFO reset mode.

Pressure sensor FIFO mode enable

The *pfifomde command is used to enable the pressure sensor FIFO mode.

Pressure sensor FIFO stream mode enable

The *pfifostr command is used to enable the pressure sensor FIFO stream mode.

Pressure sensor Stream to FIFO mode enable

The *pfifostf command enables the pressure sensor Stream-to-FIFO mode.

Pressure sensor Bypass to FIFO mode enable

The *pfifobtf command is used to enable the pressure sensor Bypass-to-FIFO mode.

Pressure sensor Bypass to Stream mode enable

The *pfifobts command is used to enable the pressure sensor Bypass-to-Stream mode.

Pressure sensor Dynamic Stream mode enable

The *pfifodstr command enables the pressure sensor Dynamic Stream mode.

PDON and PDOFF

The *PDON and *PDOFF commands are employed respectively to set to 1, and to clear to 
0, the “power-down” pin in analog devices.

Содержание eMotion








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды