ELECTRICAL CONNECTIONS
1. The Pepin is provided with a grounded electrical power cord that can extend from the rear of
side. This should be connected to a standard 120 volt AC electrical outlet. The current
requirement is approximately 3 amps. (5 amps with igniter running)
2. The power cord must be carefully routed to avoid contact with any hot or sharp exterior
surface areas of the stove. (Figure 11B) Any stove installed in a mobile home must be
electrically grounded to the steel chassis of the home and bolted to the floor in Model
compliance with, and according to building code requirements.
3. In Canada, the electrical installation must meet the applicable requirements for CSA C22.2.
Pepin installation manual
Page 15
