Mobile Home Installation
Unit must be installed in accordance with the:
Manufactured Home and Safety Standard (HUD), CFR 3280, Part 24
Figure 17.
The stove and insert has been tested and listed for mobile home installations. In addition to all
previously detailed requirements, mobile home installations must observe the following: (Figure
17).
1. WARNING: DO NOT INSTALL IN A SLEEPING ROOM.
2. WARNING: COMBUSTION AIR MUST COME FROM THE OUTSIDE OF THE
MOBILE HOME! FAILURE TO DO SO MAY CREATE NEGATIVE PRESSURE
WITHIN THE MOBILE HOME AND COULD DISRUPT PROPER VENTING AND
OPERATION OF THE PELLET STOVE.
3. CAUTION: THE STRUCTURAL INTEGRITY OF THE FLOORS, WALLS, CEILING
AND ROOF MUST BE MAINTAINED.
Pepin installation manual
Page 20