Ashby-MF Insert
41
Figure 23
The Coal Rake & the Slide-Out bottom must be in the correct position for the unit to operate correctly.
The Coal Rake must be pulled out or the burn pot will overload.
1.
Dropping the Clinkers consists of the following steps:
Step 1 - The Coal Rake.
(See figure 24)
The first step is to open the door and add a ¼ cup of
the
starter
pellets on top of the coals
.
Then push the coal rake in and separate the burning
coals from the top of the clinker. To push in the Coal rake, use the Rod Handle tool that came
with the unit.
Figure 24
Step 2 - The Ash Pan.
Make sure the Ashpan is not too full to receive a clinker. If the
Ashpan is too full, the clinker may not drop all the way through. This will not allow the
Slide-Out Bottom to be closed. If this happens, empty the Ashpan and restart the unit.
