SSR Motorsports SNAKE EYES XF250-GS, Руководство пользователя

Страница: 39 / 50

- 36 -
clutch adjuster (3) clockwise to the
stop. Loosen the clutch cable
adjusting ring lock nut (6), and
rotate the cable tensioning ring (5)
back and forth, until the grip
clearance is about 4 mm. The
clutch adjuster bolt (3) can be
used for fine tuning. After the
adjustment is completed, tighten
the lock nut (2) and (6), and cover
them with the rubber sleeve (4).
Adjustment of drive chain
①
Adjusting bolt
②
Lock nut
③
Mark
④
Rear wheel shaft nut
To adjust:
1
、
Park the motorcycle with the
central stand.
2
、
Loosen rear axle nut.
3
、
Loosen the locking nut.
4
、
Rotate the adjusting bolt left
and right to adjust the chain.
Note
：
When a new chain is
installed, it is necessary to check
both
sprockets. Replace if
necessary.
The tension of the drive
chain shall be adjusted every 500
mi, to keep a slack distance of 20 -
30 mm in the midpoint of the two
sprockets.
Precaution
：
The open end of the drive
chain connection clip shall point
away from the
direction of
rotation.
①
Chain connector clip
②
Direction of rotation
Cleaning and lubrication of drive
chain
Dirt on the drive chain may
intensify the wearing of the chain