SSR Motorsports SNAKE EYES XF250-GS, Руководство пользователя

Страница: 34 / 50

- 31 -
as an import item in regular
maintenance.
Brake rotors
It is essential to check the
front and rear brake rotors to
make sure they are not below the
minimum
thickness. If wear
exceeds the mark, the brake rotor
and pads shall be replaced with
new ones.
Warning
：
Do not drive immediately
after replacing a new brake rotor
or brake pads. Press the braking
grip several times to allow the
brake pads are fully extended, the
grip spring force restored, and the
brake fluid is circulated smoothly.
Front brake light switch
The front brake light switch
is located below the master
cylinder. To adjust, loosen the
screw and move the switch
position back and forth to find a
proper point so that the lamp is lit
immediately when pressure is
applied but before the grip is fully
pressed.
Rear brake
Adjustment of rear-wheel brake
Refer to the paragraphs for front
brake disk brake for maintenance.
Rear brake light switch
The rear brake light switch
is located at the right side of