SSP miniLITE SS348, Руководство пользователя

Страница: 4 / 10

2 GETTING STARTED
2.1 OPERATING POSITION
Upright operation
2.2 GENERAL OPERATION
FUNCTION OF LIGHT
1, When charging, power light is red, when finish charging, power light is green
2, When turn on fixture, if' s static mode, red light is off.
3, If no DMX signal when turn on fixture, green light is flickering
4, If there is DMX signal when turn on fixture, green light is always on
5, When it' s under infrared mode and there is infrared signal, red light is flickering
• 3.
6
OPERATION WITH WIRELESS OMX
\\\�
�
� W-DMXTRANSMITTER
+-- WIRELESS RECEIVING
ANTENNA
6.1 When using this lighting fixture with W-DMX receiver installed inside,
the fixture may be placed at a range of 200m from W-DMX transmitter
6.2 Select OMX from the <RUN> menu.
6.3 SelectACTI from the <WDMX> menu and proceed to turn ON the WDMX.
If the WDMX receiver card is already paired with a WDMX transmitter then
the fixture is ready for receiving OMX signal. If the WDMX receiver card needs
to be paired with a new WDMX transmitter, select YES from the <WDMX >/<REST>
menu. The green signal indicator LED will not show which confirms that WDMX
receiver card is unpaired and ready for new pairing.o
6 .4 By pressing the RESET button on W-DMX transmitter, transmitter will search for RESET
lighting fixtures. During search transmitter green SIGNAL indicator will flash. After
pairing with lighting fixture green SIGNAL indicator will display.
00 0
0
POWER SIGNAL RESET
ANTENNA
6.5 Once a lighting fixture has been paired with a W-DMX transmitter, the green SIGNAL indicator
will display. Once a lighting fixture has been paired with a W-DMX transmitter, the lighting
fixture cannot be paired with another W-DMX transmitter. If a lighting fixture requires pairing
with a new W-DMX transmitter, steps 5.3 and 5.4 must be repeated.
WDMX green signal in
dicator LED
• 16 •