r
eCeiving
& u
npaCking
RECEIVING
Immediately upon receipt of your Jet-Kleen Limited, check
the crate and all packaging materials for shipping dam-
age . The unit must be thoroughly examined upon arrival to
ensure that there is no damage by the freight carrier .
Notify the carrier and Specialized Safety Products promptly
of any damage or shortage, either visible or concealed, and
request an inspection . Failure to follow these instructions
may result in the carrier’s refusal to accept responsibility for
any damages or shortages . Do not discard or destroy the crate
or any packaging materials .
Claims for damages usually must be submitted to the freight
carrier within three (3) days . If the Jet-Kleen Limited is
damaged, it should not be unpacked or set up prior to an
inspection by the carrier’s representative .
Specialized Safety
Products is not responsible for any damage claims which
are not honored by the freight carrier.
In the event that
shipping damage occurs, we suggest that photos be taken to
document the damages at the time of delivery .
UNPACKING
After you have inspected the packaging materials for shipping
damage, you may proceed to unpack the Jet-Kleen Limited .
1 . Carefully unpack the Jet-Kleen Limited, taking precau-
tions not to damage the unit and any other enclosed
components
2 . Check the Jet-Kleen Limited and all components for
indications of shipping damage, as described in the
RECEIVING section of this manual .
3 . Carefully set the Jet-Kleen Limited in position at the
desired location in your facility .
s
afeTy
p
reCauTions
OWNER RESPONSIBILITIES
To ensure the safe and trouble-free installation and opera-
tion of this equipment, the operator(s) must have a thorough
understanding of the contents of this manual . Therefore, it
is the responsibility of the Equipment Owner to ensure that
every operator of this equipment:
1 . Read, understand, and observe the procedures recom-
mended in the Receiving and Uncrating sections of this
manual prior to uncrating .
2 . Read and understand the Safety Precautions, Operation,
and Maintenance sections prior to operation .
3 . Read, understand, and observe the General Safety and
Electrical Safety Guidelines prior to operation .
4 . Observe fundamental regulations pertaining to workers’
protection and accident prevention .
5 . Observe additional and supplementary rules and
regulations in effect at the your place of business .
Once trained, equipment operators should be continually
evaluated to ensure that they understand and are adhering to
safety guidelines and operating procedures .
GENERAL SAFETY
1 . The On/Off switch for the unit is located on the cylindri-
cal enclosure at the end furthest from the blower hose .
The switch toggles between OFF and ON .
2 . Be sure the portable unit stands level its four feet .
3 . Do not remove any guarding or the flexible hose at any
time . Do not allow objects to pass through the guard
while the fan is rotating .
4 . Always switch the unit off at the main electrical sup-
ply and remove the plug before cleaning the Jet-Kleen
Limited . Do not use a pressure washer or steam washer
to clean the unit .
5 . Eye protection should be worn at all times while
operating the unit .
6 . Do not aim the Jet-Kleen Limited at the eyes or ears .
CAUTION
Please read all information regarding safety
precautions. Failure to follow these procedures
may void your warranty.
SPECIALIZED
SAFETY
PRODUCTS
A Division of The A.W.T. World Trade Group
4321 N. Knox Ave., Chicago, IL 60641 USA
773.777.7100 • Fax:773.777.0909
www.specializedsafetyproducts.com
J
et
-K
leen
tm
4
Installation & Operation Manual
p
S
S
A Product of
