SSK SDIS - 1050, Руководство пользователя

Страница: 6 / 14

5. Technical specification
5.1. Mechanical

Weight: 4 kg

Adjustable stand with mounting hole dia. 18 mm

Dimensions: see drawing
5.2. Optical

Spectral sensitivity: PbS photocell, range 1-3 micron with a maximum response at 2.2
micron

Temperature range of materials: depends on the material to be scanned:
- For iron and steel from 250 ° C when set to high sensitivity. If it is expected
higher product temperature than 400 ° C, it is not appropriate to set a high sensitivity,
because he could detect scale or reflections.
-
For other materials, such as copper, bronze, cast iron, etc. The temperature range
depends on the infrared radiation of the product.

Angles - standard sensor is supplied with a viewing angle of 50 degrees, with a special
mask inside the aperture angle can be reduced to 30 respectively. 10 degrees. Side angle or width
of the scanned field - 3 degrees max
5.3. Electrical

Power:
- Voltage: 24V DC
- Power consumption: 12 VA

Signal the presence of the product:
-
Semiconductor: complementary push-pull outputs 0/24VDC 50 mA
- Relay: single-pole switch:
- switching capacity: 250V, 5A max
- closing time: 10 ms
- opening time: 5 ms

"Alarm": push-pull output 0/24VDC 50 mA
- 0V DC power failure, internal temperature or motor speed fault detection
- 24 V DC if no error is detected

Analog signals 4-20 mA
-
position of the material
- signal intensity