SSK SDIS - 1050, Руководство пользователя

Страница: 10 / 14

The buttons have their numerical meanings: [↑] = 1 [←] = 2 [→] = 3 [
↲
] = 4, then confirm PIN
by [
↲
].
There are two levels of user privileges to change the settings:
Basic - for change the most important parameters- PIN: 3412
Advanced - for adaptation of the sensor on actual measuring site - PIN: 2314
- includes all items of the main menu (PIN: 3412)
Use buttons
[←] and [→] for move in menu items, press enter button [
↲
] to get access to
submenu. Use escape [ ↑ ] button to get up in menu tree . Device remembers browsing history,
you can use buttons [
↲
] or [ ↑ ] to fast move (e.g. if you change the switching threshold, you
can check the device behaves in main menu and you can get simply back by pressing button
[
↲
]) few times. Specific value can be changed by pressing [
↲
] (name will be flashing). Now use
[←] and [→] to change value and confirm it by [
↲
] (name stops flashing), or go back without
saving by pressing [↑].
Sensor -> ValSet1 -> Thre 25% value set 1, threshold is 25%
ValSet2 -> Thre 50% value set 2, threshold is 50%
Set=Rel Rel – value set is chosen by external relay
Man1 - measure according ValSet1
Man2 - measure according ValSet2
Window -> Beg 5% beginning of measuring window (analog output = 4mA,
position 0%)
End 95% ending of measuring window (analog output = 20mA,
position 100%)
SysInfo -> SDIS1050 model number
SN:12001 serial number
Tem=35°C temperature inside unit (reports alarm after exceeding
60°C)
Logout -> Logout ? confirm to logout (automatically after 10 min)
Display - advanced menu (PIN: 2314)
Use buttons
[←] and [→] for move in menu items, press button [
↲
] to get access to submenu.
Use escape [ ↑ ] button to get up in menu tree . Device remember browsing history, you can use
buttons [
↲
] or [ ↑ ] to fast move (e.g. if you change the switching threshold. We check the
device behaves in main menu and you can get simply back by pressing button [
↲
]). Specific
value can be changed by pressing [
↲
] (name will be flashing). Now use [←] and [→] to change
value and confirm [
↲
] it (name stops flashing), or to go back without saving button [↑].
Mode LS
-> LS - Loop Scanner mode
operation mode - for measurement of hot material position
HMD - Hot Metal Detector
- only for hot material presence detection (without position)