Software settings
Operation by hotkeys and MIDI devices
VFO A
– choose VFO A;
VFO B
– choose VFO A;
VFO A = B
– equating frequency VFO A and B;
VFO A <> B
– swaps the VFO A and B;
SPLIT, SPLIT Lock
– on / off functions for SPLIT, SPLIT Lock;
RIT On/Off, XIT On/Off – on / off functions for RIT and XIT;
RIT/XIT Up/Down
– adjustment of RIT and XIT values;
PRS On/Off
– preselector setting;
Attenuator Up/Down
– attenuator setting;
HF AGC Up/Down
– RF AGC settings (Off, Max, Min);
Amplifier Control
– on / off control of external power amplifier;
TX
– switch to transmission mode;
TX PWR Up/Down
– output power adjustment;
Mic DSP A, Mic DSP B
– choice of microphone settings;
TUN
– switch to carrier mode;
TUN PWR Up/Down
– carrier power adjustment;
LPW On/Off
– switch for low power mode;
CWT On/Off
– switch for CW test;
CW Speed Up/Down
– CW speed control;
CW Tone Up/Down
– CW pitch adjustment;
CW Ratio Up/Down
– adjustment of dash / dot ratio;
CW Tone Hardness
– hardness of CW tone (Hard, Medium, Soft);
CW Break In Up/Down – adjustment of Break-In Delay;
Record Audio
– start / stop recording an audio file;
Play Last Record
– transmit recorded file;
Record IQ
– start / stop recording an IQ file;
Time Machine Up/Down – shift adjustment Time Machine;
Time Machine Reset
– reset Time Machine;
CW Template 1-12
– transmitting of CW template;
Setup CW Template 1-12 – editing of CW template.
SSB-Electronic GmbH © Page 82 of 88 V2.8.1 C
ontent is protected by Copyright.
