SRT AIS, Инструкция по установке и эксплуатации

Страница: 51 / 92

Operation
Page 49
4.9 Passwords and Security
Certain important information stored within the transceiver cannot be changed
without knowledge of the password. When trying to edit any of this protected
information you will be prompted to enter the password.
The password entry screen is shown in Figure 22. Highlight the required char-
acter, then press
‘Select’ to enter that character. When all characters of the
password have been entered, select ‘OK’.
Figure 22 Enter Password Screen
Following configuration of the transceiver the password should be changed
from its default value of ‘0000’ (four zeros) to another alpha numeric code.
Password change is carried out by selecting ‘
User Settings’ -> ‘Password’ .
The password should be recorded on the installation record found in Section 9.
4.10 Confirming Correct Operation
Following entry of the vessel and voyage information the transceiver will com-
mence normal operation. Correct operation should be verified as follows:
1. Select the ‘ Own dynamic data ’ option from the main menu.
16:58:29
SOG 21.1kt
UTC + 1h
COG 88.0°
50° 32.0286’ N
0° 55.2715’ W
PASSWORD SETTINGS
Enter the current password:
1 2 3 4 5 6 7 8 9 0 .
Q W E R T Y U I O
A
Z X C V B N M
!? OK
P
S D F G H J K L