SRT AIS, Инструкция по установке и эксплуатации

Страница: 36 / 92

Installation and Configuration
Page 34
● A 24VDC supply should be able to provide a peak current of 4.0A
and should be fused at 6.3A.
3.5 Grounding the Transceiver
An M4 grounding screw and ring crimp are provided in the fixing kit to allow
connection to the grounding point on the rear of the transceiver chassis as in-
dicated in Figure 16.
Figure 16 Grounding the Transceiver
This product must be connected to protective earth via the earth
connection point. It is essential that the earth connection point
is used in all installations, regardless of what other equipment is
connected. The earth connection point must be bonded to pro-
tective earth using as short a connection as possible.
3.6 Connection to an NMEA2000 network (optional)
The AIS transceiver can be connected to an NMEA2000 network by a suitable
NMEA2000 network cable available from your local dealer. If your vessel has
an NMEA2000 network please refer to the relevant documentation for you
NMEA2000 equipment. Once connected, and with your chart plotter also con-
nected you will be able to receive AIS targets on your chart plotter.
Ground screw
and ring tag
!