Phone: (408)744-9040
www.thinkSRS.com
UGA Series Universal Gas Analyzers
UGA Basics
1 – 1
There are three system options for the UGA.
-
Multiple inlet valve option (Option #1),
-
Vacuum purging vent valve option (Option #2), and
-
Hydrogen specified TP upgrade (Option #3).
The first two options can be ordered separately and installed by the
user. The third option replaces the normal TP. SRS recommends
the user should send back the normal UGA to SRS to replace TP.
Parts :
Multiple inlet valve system
Valve base
Valve controller
Valve controller holder
Control cord
Power line
RS232 comm. Line
Channel plug 2 pkg.
Top front cover for Option #1
2’ 1/16” OD, 175
m
m ID capillary, unheated, with connectors for the
valve outlet and the UGA inlet
3’ 1/16” OD, 175
m
m ID capillary, unheated, with a connector, 3 ea
Self-control accessory box
Related hardware
The multiple inlet valve system is installed on the UGA setup plate
along with its special holders. Power line and communication lines
are connected. A 2’ long, 1/16” OD, 175 mm ID capillary for the
main outlet, three 3-foot long same kind capillary, and two chan-
nel plug packages are accessories for this option. The self-control
accessory box contains a hand controller and connection cables for
the multiple inlet valve. This unit can control the multiple inlet
valve by itself without the UGA.
Parts :
Vent valve
Purge gas line connector
Vent line tube
150
m
m pinhole tube (only for Option #3 case)
1.3 Options & Sample heater accessory
1.3.1 Option #1. Multiple inlet valve option
1.3.2 Option #2. Vacuum purging vent valve option
