SRS Labs Nitrogen Laser NL100, Руководство по эксплуатации и обслуживанию

Страница: 20 / 25

10 Maintenance and Service
NL100 Nitrogen Laser
Maintenance and Service
Maintenance
The NL100 laser system, with a sealed laser tube within a modular laser cartridge, is
designed to be completely maintenance-free.
Service
The laser cartridge, which contains the laser tube and other high voltage components that
are expected to degrade with use, can be replaced, thereby restoring the NLl00 laser
system performance to that achieved when new.
We recommend that when the NL100 performance has degraded below the specifications
listed in this manual, or 2 years have elapsed since the unit was purchased or last
serviced, that the unit be returned to SRS for cartridge replacement, test and calibration.
Please contact SRS at 408-744-9040 to obtain a return merchandise authorization (RMA)
number.
For the technically sophisticated NL100 user who wishes to replace the laser cartridge by
themselves, first obtain a replacement laser cartridge from SRS and then carefully follow
the instructions and illustrations given below. We strongly recommend that only
technically sophisticated users who are familiar with lasers and high voltage circuits
perform this service operation. All other customers should return the unit to SRS for
service. If you are in doubt, call SRS.
Laser Cartridge Replacement
Tools Required
‰
Replacement laser cartridge
‰
PH1 Phillips screwdriver
‰
Nut Driver, ¼”
Procedure
1. Turn the NL100 laser key switch off and disconnect all cables.
2. Remove the Phillips screws that secure the protective housing to the laser frame and
remove the protective housing.