SRS Labs Nitrogen Laser NL100, Руководство по эксплуатации и обслуживанию

Страница: 19 / 25

Operation 9
NL100 Nitrogen Laser
High Voltage Adjust
The energy output of the NL100 laser system is roughly proportional to the high voltage
charge. The high voltage can be changed by adjusting the ten-turn potentiometer that can
be accessed through the hole labeled HV ADJUST located in the left side of the
protective housing. The high voltage of each unit is set during testing such that the unit
meets specifications. As the pulse energy drops as the laser tube ages through use,
increasing the high voltage will help offset the drop in pulse energy.
We do not recommend running the NL100 laser system with the high voltage adjusted to
the maximum for long periods because this will shorten the life of laser cartridge. If your
application does not require full pulse energy of the NL100, reducing the high voltage
may significantly increase cartridge life.
Figure 15. Changing the high voltage adjustment potentiometer.