(5 /16)
STOP:
This latching pushbutton switch turns the Hoist Control system off. Once the STOP button has been
pressed, it locks the unit to OFF position and must be rotated clockwise and released before
disengaging.
GO:
This pushbutton switch turns the selected channels of Hoist Control system ON, when the unit is
active. Once the GO button has been pressed, the energizing of the hoists is ON. The backlight of GO
button in local mode on the Base unit is ON only when one or more direction switches are in active
position /UP or DOWN/.
DIRECTION SWITCHES:
They allow changing of the direction of movement for each motor/hoist separately:
BATTERY STATUS LED:
Battery status LED indicator:
Green:
100-90%
Orange:
90-10%
Red:
10%
Red + beep:
5%
REMOTE STATUS LED:
Status LED indicator of WMC remote unit:
Green:
Power ON
Green blinking: Power ON – SLEEP - move the direction switch or press GO button to resume
from sleep. This status becomes after 3 minutes of inactivity.
Orange:
Indicates direction switch activity
Red:
GO button is pressed – sending commands to the Base unit