6
SRM PowerControl , Software, and Cleaning
SRM Software
•
In order to download and analyze SRM training files, you must have the appropriate software installed on your computer such as SRMX or SRM WIN. Choose the
compatible software for your computer’s operating system for free at:
http://www.srm.de/products/software/
•
For PC8: To create your personal rider profile, customize the display and enhance connectivity to data analysis software, download and connect your PC8 to SRM
Device Agent. SRM Device Agent software can be located at:
http://www.srm.de/products/software/
•
For information on basic software needs, downloading ride files, and setting up devices go to
or call our tech support line at: 719-266-4127
Cleaning and Service
The SRM PowerMeter and PowerControl are sealed to prevent water entry. However, we do not advise cleaning with a pressure washer. Use a mild detergent with a
soft brush or cloth to clean your PowerMeter and PowerControl. Do not clean your PowerMeter in a solvent parts washer.
SRM PowerMeter
•
Please refer to the original crank manufacturer’s recommendation for service procedure and intervals.
•
Check the battery usage in the SRM Software or on the PowerControl
•
For SRM PowerMeters with non-rechargeable solid state batteries or rechargeable batteries- when the battery has been depleted or no longer holds a charge,
the SRM PowerMeter will need to be returned to an SRM Service Center for battery replacement and service. For locations please visit
www.SRM.de/support/service-locations.
•
For SRM PowerMeters with crank spindle batteries- see the SRM Crank Spindle Battery Instructions on
Dispose of batteries according to local and federal regulations.
SRM PowerControl
•
Your SRM PowerControl has a rechargeable battery. The battery has a life of approximately 500 charge cycles. Depending on the conditions being used, this
should give 3-5 years of uninterrupted use.
•
SRM recommends keeping your PowerControl charged. Storing your PowerControl with zero battery charge (blank display) will decrease the battery life.
•
When your battery no longer holds a charge, your SRM PowerControl will need to be returned to an SRM Service Center for battery replacement and service. For
locations please visit
www.SRM.de/support/service-locations.
SRM PowerControl
•
The SRM PowerControl is used to communicate with the PowerMeter, display/store ride data and to setup necessary information for proper data collection.
•
For more information on SRM’s line of PowerControl head units visit
. PowerControl user manuals can be found at:
